Melly and me
  • Home
  • Store
  • Tutorials
  • Wholesale
  • Contact
    • FAQ
    • Privacy Policy
  • Home
  • Store
  • Tutorials
  • Wholesale
  • Contact
    • FAQ
    • Privacy Policy

Stuffing Tips

28/10/2015

 

Today I thought I would go back to basics a little as a few people have been asking how I stuff my softies so firmly.  I think that this all comes down to the equipment that you use so I thought I would share a few tips to get a firmly stuffed toy...

The first tip is repeating myself but maybe through the repeating it will capture some new readers.  The first rule of a strong and firm softie is to always use good quality polyester thread.  It is really important that you throw out the "patchwork" rules and take that cotton out of your machine whenever you start a softie.  Polyester thread is much stronger than cotton and will make your seams able to handle the strain of heavy stuffing.  The second tip on your stitches is to always set your machine to a small stitch of approx 1 - 1.5.  This again creates a stronger seam, makes the stitches less visible and creates a better end result. 

Another piece of equipment that is very important is your actual stuffing.  There is a big variance in the quality of polyester stuffings that are available.  Unfortunately one of the most available brands that is found in chain stores throughout Australia is very poor.  If you have been using this stuffing then you are probably getting lumps in your softies and getting a result that you are not happy with.  We buy our stuffing from a pillow factory as the quality is far superior and we need to buy in bulk but I have heard on the grape vine that Birch makes a good stuffing.  If any of you have any other brands you can recommend then please let me know so I can share it with everyone.  To help you in your search for the perfect stuffing, here is a little trick.  Grab a wad of the stuffing and roll it together into a ball in your hands.  If the stuffing remains in the ball you have made, with no spring back, then it is a poor stuffing and will create lumps in your work.  If the stuffing ball springs back then you know this is a great stuffing that will fill the space effectively without lumps.

The next piece of equipment that I wanted to share with you is our home made stuffing tool.  I have already shared the wooden skewer with you on another T&TT for all of your tiny pieces but this next tool is the all purpose super stuffing tool!! Go to your local craft store and buy a cheap round wooden paint brush like this.
TT1 


The cost is under $2.00 so they certainly wont break the bank. This becomes a great double sided stuffing tool.  The smooth round end of the wooden brush is used at the perfect tool for turning your softie pieces and pushing all of the seams out smoothly.
TT5


The bristle end then becomes the perfect stuffing tool with a little modification. Grap some scissors (of course, don't be like me and use your sewing scissors so you have to buy a new pair!!!) and trim the paintbrush bristles to between a quarter and half inch.  No need to be neat.
Tt2 


Play with the remaining bristles for a while with your fingers and by rubbing them against a hard surface until you have messied them up really well.  
Tt4


It should now look nice and shaggy like this
Tt6 


This shaggy end is now the perfect stuffing tool.  The reason that this tool is so helpful is that the shaggy bristles grip on to your stuffing.
Tt8


This allows you to easily maneuver the stuffing into your toy and to keep shoving it in right to the ends until it is super firm.  When you place a piece of stuffing in with this tool the stuffing will stay with your tool so that you can get it right to the location that you want it to go.  

The last tip is to just keep on stuffing!!!  A lot of people are scared of stuffing too much and of breaking the seams, but if you have followed all of the tips above and your machine tension is correct then there should be little fear of breakage. Make sure that you support the area you are stuffing with one hand, while stuffing with the other and then keep shoving it in for as long as it will fit.  If you have stuffed some sections less that others, you should still be able to maneuver stuffing to those places with your trusty tool.

Sinking Knots

26/10/2015

 

One question we often get is "Why do you attach eyes, nose, mouth etc after stuffing, and how do you do this so that knots aren't showing?" So here is a tutorial that is perhaps not easy to convey with pictures only or words only, but hopefully with the two combined it will make a lot of sense!
To answer the first part of this question, attaching applique pieces after stuffing a softie has two big benefits. The first is that a softie can be quite unpredictable and depending on fabric used, width/size of fabric pieces, firmness of stuffing etc, the end stuffie can be quite different in proportion than you initially thought.  With adding details after the toy is stuffed you have great control over getting the perfect placement and having a balanced toy.  The second reason is to avoid distortion or damage to your applique pieces.  One concern when doing your applique first is that the stitches could become damaged or pulled by your stuffing tool during the stuffing process. Another concern is that the fabric stretches (as it will do if you stuff firmly) and this may pull your stitches or even make holes in your backing fabric.  Of course this is not a hard and fast rule but it is the way we usually like to work.
For the second part of the question I will need to employ the help of some photos.  For this tutorial I am going to attach a nostril to this unfinished "Drake the dragon" by "sinking" the knots....
Tute1
In preparation for this step, you will have attached the nostril to your softie with the use of fusible web and your iron.
Tute2
Now thread your needle with the specified stands of embroidery floss (In this case I am using 2 stands of black floss), and tie a knot in the end as per usual.  I recommend that you tie a double knot in the case of 2 strands or as a rule, ensure that the knot is roughly the same width as your needle.
Tute3
Enter the needle into your toy at a point a short distance away with the tip coming out at the exact place you want to start your stitching...
Tute4
Pull the thread through and you will notice that the knot will catch at your point of entry, but of course we do not want to leave an ugly knot at the back of our toy.
Tute5
Grab a hold of the thread, close to its exit point, and give it a quick short tug...
Tute6
...this will cause the knot to pop through the weave of your fabric and "sink" inside the softie. You need to ensure that you do not tug too hard or violently or your thread will also come through the top side and you will need to start again.
....Now you can complete the sewing required on your softie. Of course this is not limited to just applique but is also the method to use for any stitching or attaching of limbs/ears etc etc....
Tute7
Once you have completed your stitching (in this case, I have button-hole appliquéd the nostril in place) and are ready to take your last stitch, tie a knot close to the base of your thread. Again ensure that the knot is roughly the same width as your needle as shown.
Tute8
Take your last stitch, threading the needle through to the same area that your entered before stitching (I recommend the back of your toy)..
Tute9
Again your thread will snag when the knot reaches the fabric.  Tug the thread again to sink this finishing knot into the softie...
Tute10
Cut the thread right at the fabric and this cut end will also sink into the toy..
Tute11
...resulting in an appliquéd nostril with no visible threads or knots!!

Sewing Inner Legs on Melly & me softies

25/10/2015

 

This next tutorial is really only an aid to sewing some of my toys such as Phoebe, Pippi, Dawn, Scotty McSpotty and Kiki to name a few.  I have had a number of people say that they either do not understand or have had difficulty transitioning from sewing around the body to sewing the inner legs. Hopefully this will make it a little clearer and will help those who have tackled or are yet to tackle these patterns.
For this tutorial I am making some basic mini Phoebes, but the principles are the same for any of the mentioned patterns - You would be likely to have something looking a little different than my tutorial pieces - with hoof fabric/toes etc.
Step 1.  First you will have your main body pieces and inner leg pieces which have been prepared as per your pattern.
Tut1
Step 2.  Following the instructions in your pattern, place one inner leg piece on top of one main body piece, right sides together.  You tack/pin these together and then sew all the way around the edges of the inner leg from toy back to toy front. One note that should be on all of the four mentioned patterns is that you need to curve the seams at the beginning and end of your inner legs to the edge of the fabric.  This is an essential step in the process.
Tut2
Step 3.  Repeat this with your remaining pieces and you will now have two of the following.
Tut3
Step 4.  Place your two toy sides on top of each other, right sides together and then pin all around the body, starting from one edge of the inner leg to the other.
Tut5
Step 5.  Fold the legs up against the body to reveal the top edge of the inner legs.  You will see how the top straight edges of the inner legs are now right sides together and become a circle with the rest of the body.
Tut6
Step 6. Tack/pin the top edge of the inner legs together.
Tut7
Step 7.  Now sew around your toy with a small stitch on your sewing machine, starting at the turning gap, until you reach the inner leg seam. If you have curved your seams accurately on the legs (at step 2), you should be able to sew over the leg seam now and continue around the inner legs of your toy and back up to the other side of your turning gap.  Some people seem to be having troubles at this point, or end up with puckers, so the next few steps will show you an alternate method to ensure your seams are perfect.
Sew around the toy, starting at the turning gap, until you reach the inner leg section.  Sew stitches all the way up to the outer leg seam and then secure your stitches with backwards/forward stitching.
Tut8
Tut9
Step 8.  Now fold the legs up against the body and start sewing the top edges of the inner legs together, starting right at the outer leg seam and securing stitches.
Tut10
DSC04107
Step 8.  Sew all of the inner legs together, ending and securing your stitches when you again reach the next outer leg seam.  Fold the legs down again and then start sewing the remainder of your body, up to the turning gap, starting right at the seam once again.
SONY DSC
  Step 9.  You should now have a fully sewn toy looking something like this.
SONY DSC
Step 10.  Snip corners and curves and then turn your toy right side out through your turning gap. Your inner leg seams should now look nice, neat and pucker free like this!
Tut14
I hope you all have perfect inner legs now - hee-hee, sounds like we have just completed an aerobics class!

Turning Small Parts

25/10/2015

 

Mrs Perkins' horns and other small parts can be tricky to turn and I often hear of people having piles of frayed horns after attempting again and again to turn the little fiddly pieces.  I actually find it quite easy to turn the horns with just the use of a wooden skewer, but this has come with practice and re-use.  This trick that I am about to show you is fool proof and so quick, some of you will give big sighs of relief, I am sure!

TTT1

Firstly, the sewing foundations need to be right to get the desired result.  With all small and fiddly bits you would be sewing on the traced line as this gives you much greater control as you work with a larger piece of fabric. We recommend that you always use a small stitch of 1 - 1.5 when sewing any parts that are to be stuffed.  It is also a big help to always use polyester thread for softies due to the added strength.  Cotton thread will break easily and may not be able to handle the strain of firm stuffing.
TTT2
Once you have sewn your small shape, cut it out approx 1/8" outside the sewn line.
TTT3
The next step is to grab yourself a drinking straw.  I suggest getting one that is a little sturdier that your "bulk pack" variety. The ones that you get from fast food stores or a re-usable plastic straw would be perfect.
TTT4
Take your horn between your two fingers and twist the fabric against itself to open it up.
TTT5
And then slide the horn over the end of your straw.
TTT6
Now you need to get your second tool (an essential tool for softie making!!) which is a standard wooden skewer - the type you find in your supermarket for skewering meat.  Making sure that you are using the flat end of your skewer, push the sewn end of the horn into the straw opening.
TTT7
Keep pushing the horn into and through the straw so that it is turning the horn right side out.
TTT8
Continue pushing the horn through to the other end of the straw....
TTT9
And Voila!!!  A perfect turned horn - without the sweat and tears!!!
TTT10
And while you are equipped with your wooden skewer, it is the perfect tool to stuff your horn as well!

<<Previous
Forward>>

    Tutorials Quick Links

    All
    Always Flowers Tutorial
    Ladder Stitch To Attach Parts
    Ladder Stitch To Close Gaps
    Panel Book
    Panel Bunting
    Satin Stitch Tips
    Sewing Inner Legs
    Sinking Knots
    Stuffing Tips
    Turning Small Parts
    Wallflower Quilt Tutorial


Copyright © Melly & me 2020
  • Home
  • Store
  • Tutorials
  • Wholesale
  • Contact
    • FAQ
    • Privacy Policy